ENGINEERING TECHNICIAN (MECHANICAL)
Naval Shipyard, Portsmouth, Virginia
Naval Shipyard, Portsmouth, Virginia, Virginia, United States · full time
USD 90838-118092 per year
About this role
You will serve as a ENGINEERING TECHNICIAN (MECHANICAL) in the Temporary Services /Steam Plant Cleanliness Branch (Code 269), Fluid/Mechanical Engineering and Planning Division (Code 260), Office of Chief Engineer (Code 240), Engineering and Planning Department (Code 200) of NORFOLK NAVAL SHIPYARD.
Duties You will review existing Ship Installation Drawings (SIDs) and equipment technical manuals to determine characteristics of temporary services required as well as identify cleanliness recovery actions based on system conditions. You will perform Ship-checks and inspect shore facilities to verify arrangement and to identify locations for new equipment, connection points to ship's systems, and associated piping runs. You will review ship's system diagrams and NAVSEA instructions to identify systems required to be steam plant clean to ensure TWDs comply with all required specifications. You will provide direction for procurement of material and services associated with the assigned projects, ensuring specifications describe completely the material, operating parameters, and any special requirements to permit competitive bidding. You will identify material costs and production man-hours required for all phases of tasking for incorporation into Job Summaries and for preplanning use by shipyard customers. You will develop and maintain temporary service sketches and adjusts sketches as required as result of critiques and process improvement. You will coordinate the efforts on design engineering projects with personnel from other engineering codes or from other activities when a satisfactory conclusion is dependent upon the performance of several activities. You will provide waterfront support during execution of temporary service system installation, removal, modification and repair, and loss of steam plant cleanliness evaluation and recovery. You will resolve problems encountered during installation, removal, grooming, or testing phases of temporary systems, and during installation, repair, and drying of shipboard steam plant clean systems.
Qualifications Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Designing, specifying, and installing temporary service systems (including high-pressure air, breathing air, temporary cooling water manifolds, and steam lines) to support nuclear-powered submarines and aircraft carriers during shipyard availabilities and drydock periods. Troubleshooting and resolving complex mechanical and utility system failures on the waterfront, evaluating operational data to recommend and implement engineering solutions that comply with NAVSEA technical requirements a applicable safety parameters. Coordinating cross-functionally with production shops (such as Shipfitters, Pipefitters, and Machinists) and related engineering disciplines (structural and electrical) to integrate temporary ship-to-shore utility hookups safely and efficiently. Researching and procuring specialized mechanical components and materials utilizing DoD material databases (such as MAT, OneTouch, and WebFLIS), ensuring strict compliance with military ordering codes and quality assurance requirements. Evaluating and applying the latest technological developments, testing methods, and engineering precedents to modernize waterfront utility distribution, mitigate operational risks, and reduce cost and lead times. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Required documents You are required to provide documentation that supports the eligibility and qualification claims made in your resume. You must submit the applicable documents listed here and those listed with the eligibilities you select in the announcement questionnaire with your application package. Applicants who do not provide supporting documentation that fully support their claims will not be referred to the hiring manager. Cover letter is optional. A complete resume is required. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume. Are you applying for a promotion? For GS positions, to be considered for a promotion, you must provide SF-50(s) that shows you held the next lower GS grade for at least one year. SF-50s that have an effective date within the past year (e.g., General Adjustment SF-50 from this year or Within Rate/Grade Increases (WRI/WGI) SF-50 within a year) do not clearly show that you meet the one-year time-in-grade requirement. That means if you submit an SF-50 dated within the last year, you must submit another SF-50 dated more than one year ago to clearly demonstrate you meet the time-in-grade requirements. If you are a DoD employee, you can obtain a copy of your SF- 50(s) from MyBiz. Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package. Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified. Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor Are you a disabled veteran or claiming 10-point veterans' preference? If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference. You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf. Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.). Application documents, including supplemental ones, may be shared outside the Human Resources Office. Supplemental documents may contain your SSN, DOB, or personal information of others (e.g., on military orders, marriage certificates). You may redact this information before submitting; however, if selected, you must provide unredacted originals.
How to apply Click the Apply Online button to create an account or log in to your existing USAJOBS account. To apply for this position, you must provide a complete Application Package which includes: 1. Complete resume with relevant experience, job title, duties and accomplishments. Resumes are restricted to no more than 2 pages. Illegible/unreadable resumes will not be considered. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience. TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume. 2. Supporting documentation Failure to submit a complete application package will result in an ineligible rating and loss of consideration. Your complete application must be received by 11:59 pm Eastern Standard Time (EST) on 11/13/2026. Applications received after 11/13/2026 will generally result in an ineligible rating and loss of consideration. If more than one resume is received, only the last resume received and processed will be reviewed. For additional information on viewing your application status, click https://help.usajobs.gov/how-to/application/status. You are encouraged to apply online. Applying online will allow you to review and track the status of your application. Do not email or send hard copy resumes/applications to the Contact Information or Agency Information listed in this vacancy announcement. All resumes/applications received at the addresses listed in the Contact Information or Agency Information will be destroyed and will not be considered for this vacancy announcement. It is the applicant's responsibility to verify that all information in their resume and documents are legible and accurate. HR will not modify answers/documents submitted by an applicant.
Additional information This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Source: USAJOBS. View the original listing