SMALL ARMS REPAIRER

About this role

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a SMALL ARMS REPAIRER, Position Description Number D1227000 and is part of the MD CSMS, National Guard.

Duties The purpose of this position is to perform maintenance, repair, and inspections on small arms and related devices. The primary purposes are to provide maintenance repair and accurization of national match weapons. This position is responsible for the following duties: 1. Performs accurization of national match weapons (pistols, rifles, and light machine guns) on a limited basis. Accurization involves altering and refining mass-produced weapons for use in national competition, by increasing their accuracy and reliability beyond factory specifications. This process involves selecting, fitting, and altering parts to improve the weapon. Altering includes peening, bending, filing, grinding, and the use of lapping compound to alter parts such as individual slide, receiver, sear, disconnector, barrel, barrel bushing, magazine, hammer, recoil spring, flash suppressor, operating rod spring guide, gas cylinder, stock, and the spindle valve. 2. Disassembles weapons, assemblies, subassemblies and other components. Examines for defects, misalignment and malfunctions. Replaces barrels, firing pins, springs, trigger mechanisms, shell ejectors, and other parts and assemblies. Modifies small weapons by replacing worn or obsolete parts and using hand and power tools, precision gauges, test instruments, jigs and alignment devices in making repairs, modifications, and adjustments. Applies final finishes and test fires and/or performs operational checks of arms repaired to ensure safety, accuracy, and ease of operation. 3. Performs overhaul, maintenance, and repair on a variety of small arms. Diagnoses and identifies mechanical deficiencies and/or malfunctions in weapons including: automatic pistols, revolvers, shotguns, automatic rifles, grenade launchers, machine guns, and rocket launchers, and other small arms and accessories. 4. Uses micrometer to measure altered tolerances and makes additional adjustments as required. Anneals certain parts until the proper temper of the metal is obtained. Selects certain parts of specific hardness by researching characteristics of various metals in technical manuals. Uses pre-set specifications to ensure that critical operating tolerances are met. Test fires weapons to ensure that they meet desired performance requirements. Performs other duties as assigned.

Qualifications Military Grade: E1-E7 GENERAL EXPERIENCE: Experience or training which demonstrates a working knowledge to read and interpret instructions, repair manual, specifications, and drawings; must have a knowledge of shop mathematics sufficient to use testing devices and measuring instruments; and be proficient in the use and maintenance of hand tools and equipment. SPECIALIZED EXPERIENCE: WG-08 - Experience or training which demonstrates ability to work effectively and efficiently on weapons and mechanical systems in disassembly for repair, inspection to diagnose mechanical malfunctioning, wear and/or damage is required. Experience in adjustment of levers, gear linkages and synchronization of interrelated mechanical systems. Experience in applying technical manuals, regulations, specifications, and drawings to determine operation, assembly, and a tolerance of the variety of weapons cleaned, repaired, and modified, is required. Experience in using and maintaining a variety of hand and power tools and gages is required. Tools include drills, files, saws, hammers, vises, and precision gages and measuring instruments such as micrometers, optical comparators, ultrasonic checkers, magnafluxing machines and/or borescopes to determine when parts are worn or damaged beyond acceptable tolerances. WG-09 - Experience or training with substantial mechanical skill is required to effectively and efficiently repair, overhaul, and rebuild small arms for both conventional uses and for weapons involving accurization. Experience to inspect, diagnose malfunctioning, wear and/or damage is required. The ability to perform accurization procedures on weapons to improve their performance is required. Basic knowledge of other trades to modify and/or manufacture weapons parts for accurization is required. Experience to apply technical manuals, regulations, specifications and drawings to determine operation, assembly, and tolerances of the variety of weapons worked on is required for successful performance. Experience using and maintaining a variety of hand and power tools and gages is required. Tools include drills, files, precision gages and measuring instruments, magnafluxing equipment and/or borescopes to determine when parts are worn or damaged beyond acceptable tolerances. Length of time is not of itself qualifying. Candidates' experience should be evaluated based on duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position.

Education You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

Requirements NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement. Males born after 31 December 1959 must be registered for Selective Service. Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Participation in direct deposit is mandatory. Must be able to obtain a Secret Security Clearance within one year of appointment.

Required documents To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing: Contact Information-your name and the best way to contact you. Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade. Education, certifications or licensures. 2. Other supporting documents: If you are a current Federal Employee, please submit your most current non-award SF-50 when applying. If selected, failure to submit this documentation may affect your pay and/or delay your appointment.

How to apply To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13104966 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Additional information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). We may use this announcement to fill additional vacancies within 180 days of the closing date. This position MAY be eligible for recruitment or relocation incentives, pending availability of funding and management request. This position is in the Excepted Service and does NOT convey eligibility to be converted to the Competitive Service.